Disc Transponder 125 kHz (KATE)
The transponders are operated at 125 kHz.
The transmitting antenna of the reading unit supplies the transponder with energy by using an alternating field of 125 kHz. This induces a voltage within the coil of the transponder, which generates a current that is sufficient power supply for the micro chip. The system‘s operability is guaranteed through fluid, gaseous as well as solid material.
However, if mounted directly on or within metal, the transponder‘s reading distance is influenced and the positioning signal may be distorted.
The Read-Write transponders are equipped with an EEPROM in which the code is stored. The EEPROM may be rewritten up to more than 100,000 times.
Transponder variant pre-programmed with user-defined codes.
Application Examples from the Automation Industry
Automated Guided Vehicles (AGV):
- Track Guidance
|Data sheet HW DEV00127-00128 Rev. 01 (PDF)||357.47 KB||06.06.2019|